Zuri Designs - SACRED HEART Silicone Mould #VDS-SHT01

Zuri Designs - SACRED HEART - SILICONE MOLD

Top Left: Width 2.66" (67.7mm) Height 2.57" (65.5mm) Depth: 0.35" (9mm)

Top right: Width 2.89" (73.4mm) Height: 2.44" (62.1mm) Depth 0.35" (9mm)

Bottom: Width 6.19" (157.3mm) Height 6" (152.3mm) Depth: 0.35" (9mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

MPN:  VDS-SHT01
UPC:  786368941949

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use ZURI molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.